saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 1/7 4 5 6 1 23 1 23 65 4 features cdma applications usable bandwidth of 25 mhz no impedance matching require for operation at 50 ceramic surface mounted device package ( 3.0 mm * 3 .0 mm ) singleended operation rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range 30 25 85 storage temperature range 40 85 power handling capability dbm electrostatics sensitive device ( esd ) pin configurations 2 input 5 output 1, 3, 4, 6 case ground i 8364
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 2/7 specifications notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements are measured relati ve to insertion loss minimum typical maximum unit center frequency ( fc ) 836.5 mhz insertion loss (in fc +/ 12.5 mhz) 1.76 3.0 db amplitude ripple (in fc +/ 12.5 mhz) 0.77 1.5 db pp vswr (in fc +/ 12.5 mhz) 2.0 2.2 relative attenuation dc ~ 800.0 mhz 869.0 mhz ~ 894.0 mhz 894.0 mhz ~ 1049.0 mhz 1049.0 mhz ~ 1200.0 mhz 1200.0 mhz ~ 2000.0 mhz 45.0 25.0 35.0 48.0 35.0 51.0 29.0 40.0 53.0 39.0 db temperature range (operational) 30 25 85 input rf power (in fc +/ 12.5 mhz) 10 dbm input/output impedance 50 ohms
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 8364 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 4/7 typical performance ( at 25 ) ch1 s21 log 10 db/ ref 0 db center836. 500 000 mhz span 300. 000 000 mhz cor 29 may 2007 14:01:27 1 2 3 4 4:-1 . 8452 db 836. 500 000 mhz ch1markers 1:-54 . 044 db 800. 000 mhz 2:-33 . 515 db 869. 000 mhz 3:-39 . 307 db 894. 000 mhz ch2 s21 log 1 db/ ref 0 db center836. 500 000 mhz span 100. 000 000 mhz cor 29 may 2007 14:01:38 1 2 2:- . 21380 db 25. 000 000 mhz ref=1 ch2markers mean:-2 . 2931 db s. dev: . 24690 db p-p : . 86920 db
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 5/7 ch1 s11 swr 1 / ref 1 center 836. 500 000 mhz span 300. 000 000 mhz cor 29 may 2007 14:02:02 1 2 3 3: 1. 2652 836. 500 000 mhz ch1 markers 1: 1. 1764 824. 000 mhz 2: 1. 3746 849. 000 mhz ch1 s22 swr 1 / ref 1 center 836. 500 000 mhz span 300. 000 000 mhz cor 29 may 2007 14:02:16 1 2 3 3: 1. 2471 836. 500 000 mhz ch1 markers 1: 1. 1995 824. 000 mhz 2: 1. 3788 849. 000 mhz ch1 s11 1 u fs center 836. 500 000 mhz span 300. 000 000 mhz cor 29 may 2007 14:02:08 1 2 3 3: 57. 238 -10 . 318 18. 439 pf 836. 500 000 mhz ch1 markers 1: 48. 375 -7 . 6816 824. 000 mhz 2: 52. 545 -16 . 172 849. 000 mhz ch1 s22 1 u fs center 836. 500 000 mhz span 300. 000 000 mhz cor 29 may 2007 14:02:24 1 2 3 3: 53. 809 -10 . 840 17. 552 pf 836. 500 000 mhz ch1 markers 1: 45. 879 -7 . 5723 824. 000 mhz 2: 51. 020 -16 . 266 849. 000 mhz input / output vswr charts input / output smith charts
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 6/7 packing specification 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pc s / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F8364 part no. F8364 rev. date 20070529 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nf7008as01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
